M 1000 T

Industrial Technology & artisan quality

 

PRODUCTION : The M1000 T Loom permits the production of the following types of fabrics : Light Jute Carpets , Light Sisal Carpets , Light Carpets .

MAIN MOTOR :
The main working is effected by a 5,5 Kw motor .

HEALD FRAMES MOVEMENT :
The heald frames movement can be effected with the following systems :
a- Cams movement
b- Electronic rotary Dobby up to 12 shafts .

GRIPPERS & TAPES :
The Grippers are special positive type and they are installed on flexible tapes . The body is steel covered with hard chromium to protect from the wear . The tapes slide on special hooks without touch the warp .

ELECTRONICAL FABRIC TAKE UP :
The fabric Take Up is electronic and it is controlled by Controller C1000 . The adjustment of the fabric density can change from 10 up to 200 weft per decimetre

REED MOVEMENT :
The reed movement is effected by two couples of positive cams that are installed inside of oil boxes fixed on the lateral shoulders of the loom . The cams couples are installed on the main shaft ( camshaft) . The main shaft is a whole shaft without any connection joint , to guarantee in the years , a total absence of clearance and vibrations .
 

ELECTRONICAL WARP LET OFF : The warp Let Off is electronic by two motor-variators. Each motor-variator controls one warp roller . WARP : The warp is feeded by spool stand

CONTROLLER C1000 :
The main functions of C1000 are the following :
- Indication of statistic and operative data
- Programming of dobby and weft selector programs
- Programming and control of the warp Let Off
- Programming of motor time and ramp start
- Programming of the fabric anti-defect systems

 

Loom Reed Widht	Max Speed – RPM
2.100 mm	150

MAZZINI s.a.s.  Italy

Via Gioberti n° 56 51031 Agliana (Pistoia) Italy

Partiva Iva: 00089230478

Tel. e Fax: +39.0574.718.056

E-mail: mazzinisas@libero.it