|

   


M 1000 SW
Industrial
Technology & artisan quality
 |
VERSATILITY :
The M1000 SW Loom permits the production of the
following types of fabrics : Combed Wool , Carded
Wool, Silk ,Cotton , Jute , Polyester , Furnishings
Fabrics , Industrial Fabrics and Geo-Textile Fabrics
.
MAIN MOTOR :
The main working is effected by a 5,5 Kw motor .
|
HEALD FRAMES MOVEMENT :
The heald frames movement can be effected with the following
systems :
a- Cams movement
b- Electronic rotary Dobby up to max . 20 shafts .
GRIPPERS :
The Grippers are installed on flexible tapes . The body is
steel covered with hard chromium to protect from the wear .
The M1000SW loom can be equipped also by positive grippers
whose characteristic is to take and exchange the weft in
positive way , permitting the weaving of very special wefts
.
ELECTRONICAL FABRIC TAKE UP :
The fabric Take Up is electronic and it is controlled by
Controller C1000 . The adjustment of the fabric density can
change from 35 up to 570 weft per decimetre
REED MOVEMENT :
The reed movement is effected by two couples of positive cams that are
installed inside of oil boxes fixed on the lateral shoulders
of the loom . The cams couples are installed on the main
shaft ( camshaft) . The main shaft is a whole shaft without
any connection joint , to guarantee in the years ,
independently of the speed , a total absence of clearance
and vibrations .
|
ELECTRONICAL
WARP LET OFF :
The warp Let Off is electronic and it is controlled by
Controller C1000 .
CONTROLLER C1000 :
The main functions of C1000 are the following : |
 |
- Indication of statistic and operative data
- Programming of dobby and weft selector programs
- Programming and control of the warp Let Off
- Programming and control of the fabric Take Up
- Programming of motor time and ramp start
- Programming of the fabric anti-defect systems
Loom Reed Widht
|
Max Speed – RPM
|
|
6.000 mm |
150 |

MAZZINI s.a.s. Italy
Via Gioberti n° 56 51031 Agliana (Pistoia) Italy
Partiva Iva: 00089230478
Tel. e Fax: +39.0574.718.056
E-mail:
mazzinisas@libero.it

|